Excavating contractor in Martinsville, IN

Building pads on Morgan County's rolling terrain cannot be created by simply scraping the surface level. The high side must be cut down and the low side must be filled up to create a stable, flat pad. The fill material must then be compacted in layers — uncompacted fill on a slope will settle over time and cause the structure above it to shift.

Clay on a slope sheds water at the surface rather than absorbing it, which sends runoff downhill with increasing speed. That moving water carries soil with it and can cut a gully during a single heavy rain. Exposed clay slopes during excavation must be protected and water must be directed to stable outlets to prevent erosion that is difficult and expensive to repair.

Wooded lots near Morgan-Monroe State Forest carry mature timber, dense understory, and deep root systems on sloped ground. Clearing these sites requires removing trees and brush in a sequence that does not destabilize the slope before grading equipment arrives. Stumps must be fully grubbed so the ground is solid and accessible for excavation.

Yes. Properties in the White River valley near Martinsville must account for both slope drainage and proximity to the river drainage system. Water moving off a graded site needs a clear path to a stable outlet. Grading that sends water toward low-lying areas near creek drainages can create problems during heavy rain events when those drainages are already carrying flow.